Filter
Top Products
M13 wrench, M5 hex key
Check the crossbraces to ensure that the bolt and nut securing both
crossbraces in the center of the wheelchair are secure (crossbraces
should be loose enough to fold easily, yet snug enough to take up excess
play). Use an M13 wrench and M5 hex key to tighten.
M10 wrench
1. Use an M10
wrench to loosen
the adjustment
bolt until the
wheel lock slides
on the frame.
2. Place the wheel
lock in the
locked position
and slide it into
contact with the
tire.
3. Place the wheel lock in the unlocked position and slide it
3
/8" closer
to the tire.
4. Use an M10 wrench to tighten the adjustment bolt and engage the
wheel lock to check the fit. The wheel lock should indent the tire at
least
3
/8".
5. Repeat steps 1-4 for other wheel lock. Tighten the adjustment bolts
securely to eliminate wheel lock movement on frame.
WARNING: Ensure that wheel locks are adjusted so that they
lock in place appropriately before occupying or operating
wheelchair.
right wheel
shoe
adjustment bolt
lever
adjust wheel lock