Filter
Top Products
M13 wrench
WARNING: The footplates' lowest point should be no closer to
the ground than 2
1
/2 inches, to permit proper clearance.
WARNING: Do not stand on the footplates; this could cause the
wheelchair to tip.
1. Set legrest on
wheelchair frame (so
that legrest hinge plates
engage hinge pin bolts).
2. Swing legrest inward.
3. Use an M13 wrench to
attach anti-theft nuts.
4. Ensure that legrests
are locked in place
and that swingaway
release levers are
locked in a rearward
position, toward back of
wheelchair.
WARNING: Ensure that front rigging is locked in place before
occupying or operating wheelchair.
nut
hinge
plate
swingaway
release lever
remove elevating legrest /
optional footrest