Filter
Top Products
M10 wrench, M4 hex key
All Traveler HTC arms are fixed.
1. Use an M10 wrench
and M4 hex key to
remove bolt and nut
that secure arm to
front arm socket.
2. Hold arm by center
of armpad. Lift
straight up and off.
1. Hold arm by center
of armpad. Lower
arm straight down
into sockets.
2. Install bolt and nut that secure arm to front arm socket as shown
above. Use an M10 wrench and M4 hex key to tighten. Ensure nut is
tightened and locked in place.
WARNING: Ensure that arms are locked in place before
occupying or operating wheelchair.
remove arm
nut
right arm
bolt
front arm
socket