Filter
Top Products
20
Preventative Maintenance Checklist
Procedure Monthly Every
3 Months
Every
6 months
Inspect General Condition of cooling tower.
¨
Check Water Level in cold water basin.
Adjust if needed.
¨
Check float ball & Make-up Valve for
proper operation.
¨
Check Line Voltage, Motor Amperage,
Water Pressure.
¨
Clean Sump Strainers, if installed.
¨
Lubricate Motor Bearing, (if motor has
fittings for greasing. The majority of motors
require no external greasing). Use Proper
Lubricants. Increase frequency, as necessary
depending on conditions of service.
¨
Check for obstructed Water Flow Through
Orifices. Clean and flush spray nozzles, as
required.
¨
Check All Bolts which can cause unbalance
and vibration and tighten specified torque.
¨
Check Condition of Water for proper
treatment to prevent build-up of algae and
solids concentration
¨
Clean and flush Cold Water Sump
¨