Delphi II DL-00035 Medical Alarms User Manual


  Open as PDF
of 40
 
16
DL-00035 Rev. 4
Measuring Blood Glucose
The monitor will ask you if you wish to use the LifeScan OneTouch
®
Ultra
®
Blood
GlucoseMeterthatcamewiththemonitor,orifyouwanttoenteryourblood
glucose level manually.
To use the OneTouch
®
Ultra
®
meter, connect the meter to the appropriate cable
on the monitor and follow the instructions on the screen.
For manually entered information, the monitor will ask you to verify that the
number you entered is correct. (Blood glucose level can be entered in either
mg/dL or mmol/L, depending on personal preference or meter type.)
If you receive any error codes while taking measurements, follow the instructions
on the screen and contact your clinician.
Measuring Prothrombin Time
1. Press “Take Measurements.”
2. Press “Protime.”
The monitor will display the following instructions:
1. Enter your protime reading (as displayed on your meter) per manufacturer’s
instructions.
2. Is this PT (prothrombin time) or INR (internationalized normalized ratio)?
3. Press “Complete” when data is entered.
If you receive any error codes while taking measurements, follow the instructions
on the monitor’s screen and contact your clinician.
PRECAUTION:
FOLLOWTHEMANUFACTURER’SINSTRUCTIONSFORUSEWHEN
USINGAGLUCOSEMETERANDSTRIPS.
PRECAUTION:
FOLLOWTHEMANUFACTURER’SINSTRUCTIONSFORUSEWHEN
USINGAPROTHROMBINTIMEMETER.
 previous next