Filter
Top Products
- Eng 22 -
English
BEFORE REQUESTING REPAIRS OR TESTING
Make sure to check the following before sending your blood pressure monitor
away to be tested or repaired.
Problem Checks Response
Display stays blank
when you press the
“START/STOP” switch.
Check whether the
batteries are dead.
Replace all the batteries
with new ones.
Check whether the
batteries are installed
the right way round
(m and , oriented
correctly).
Load the batteries in the
correct direction.
No measurements can
be taken.
Check whether the
measurement icon
is
displayed.
Attach the arm cuff
properly.
Check whether the arm
cuff is applied correctly.
Did you stay calm during
measurement?
Measure your blood
pressure again, making
sure to remain still.
Note that blood pressure measurement may not be
possible for someone with an extremely weak pulse
or cardiac arrhythmia (irregular pulses).
Your blood pressure readings are abnormally high
or low compared with those taken in hospital.
See page 21.
Your blood pressure readings are abnormally high
or low.
See page 13.