Filter
Top Products
4. Press the exhaust button
Press the exhaust button
to completely release the
air within the cuff.
SYSTOLIC mmHg DIASTOLIC mmHg
PULSE/min
Approximately 2 seconds
later, blood pressure val-
ues and pulse appear al-
ternately on the display
PULSE/min
SYSTOLIC mmHg DIASTOLIC mmHg
PULSE/min
SYSTOLIC mmHg DIASTOLIC mmHg
PULSE/min
SYSTOLIC mmHg DIASTOLIC mmHg
PULSE/min
When pressurization is
completed, the automatic
air-release system will
gradually reduce cuff
pressure, and Measuring
Mark “Q” will appear on
Flashing
Flashing
Flashing
Altemate display
5. Power off
Touch the power switch
for power off.
If this unit is left on after
measurement an auto-
matic power-off function
turns the power off after
approximately 3 minutes.
SYSTOLIC mmHg DIASTOLIC mmHg
PULSE/min
POWER
Touch the power switch
SYSTOLIC mmHg DIASTOLIC mmHg
When a pulse is detected,
the pressure value moves
to the right side of the dis-
play. At this time Measur-
ing Mark “Q” flashes with
a short beep at the same
rate as pulse rate.
When the measurement is
completed, the buzzer
beeps, Systolic pressure is
displayed on the left and
Diastolic pressure on the
right.
the display indication that measurement is in progress.
- Eng 8 -