Filter
Top Products
Precautions for use
• If you suffer from heart disease, high blood pressure or other
circulatory disease, please consult your doctor first.
• If you feel abnormal pressure of the cuff during use or any
other irregularity, reduce the pressure by immediately switch-
ing off the power or removing the batteries and consult the
sales outlet where purchased.
• If you think the measured value is abnormal or if measuring
makes you feel unwell, discontinue use and consult your
doctor.
• Measurement of blood pressure may not be possible for
someone with a weak pulse or arrhythmia.
• Congestion, swelling, etc. may occur in some people.
• If blood pressure is measured repeatedly, an accurate result
will not be achieved. An interval of about 10 minutes should
be allowed.
• The memory is erased if the batteries are removed for re-
placement, etc. and a record should be kept of any necessary
data.
PRECAUTION FOR USE AND MAINTENANCE
• Measure blood pressure with a relaxed and quiet posture.
Keep the center of the cuff at the level of your heart, and do
NOT move your arm or talk during measurement.
• Do NOT keep on measuring so many times, as your arm will
have built up congestion of blood, and you will not get a valid
reading.
Precautions for maintenance
• Do NOT store the blood pressure monitor where it will be
exposed to direct sunlight, high temperature (over 60˚C), low
temperature (below –20˚C), high relative humidity (over 95%)
or in a dusty place.
• Do NOT expose the blood pressure monitor to under force or
vibration, or drop it.
• Remove the battery/batteries when not in use for a long period.
• Do NOT disassemble the apparatus.
• Do NOT bend the cuff or air hose unnecessarily.
• NEVER wipe the blood pressure monitor with thinner or ben-
zene, as they may damage it.
• When the monitor is very dirty, wipe it clean with a cloth
moistened with Sterilizing alcohol or a neutral detergent, and
then wipe it with a dry cloth. Do NOT use thinner or benzene.
Nature and frequency of maintenance:
This products is designed for use over an extended period of
time; however, it is generally recommended that it be inspected
every two years to ensure proper function and performance.
- Eng 4 -