Filter
Top Products
1. Installing battery
Insert the cuff hose and bulb hose into the hose connector.
2. Inserting hoses
Take off the battery cover at the back of the unit by sliding it
as shown.
Install a 9V battery (6F22, 6LR61) taking care for the polarity.
Protect the nature environment:
Please help protect natural environment by respecting national
and/or local recycling regulations when disposing of the bat-
teries and the products at the end of their useful lives.
Reference European standard:
This products complies with EC instructions 93/42/EEC (Medi-
cal Device Directive) and with the following standards: EN 1060-
1 : 1995 “Noninvasive Sphygmomanometers, Part 1 General
Requirements” and EN 1060-3 : 1997 “Noninvasive Sphygmo-
manometers, Part 3 Supplementary Requirements” for Elec-
tromechanical Blood-Pressure Measuring Systems.
Manufacturer:
Name: Premier Precision Ltd.
Address: Block E, G-H, 6
th
floor,
Phase 2, Yip Fat Factory Building,
73-75 Hoi Yuen Road,
Kwun Tong, Kowloon, Hong Kong
European Representative:
Name: WvW elektronische Geräte Vertrieb GmbH.
Address: Robert-Koch-Straße 20,
D-80538 München,
GERMANY
PREPARATION FOR MEASUREMENTS
Bulb hose
Cuff hose
English
- Eng 5 -