Filter
Top Products
- Eng 6 -
SETTING ALARM, TIME, DATE, AND MODE
1. Turn the power on
Push and hold the POWER/MEASURE switch for a
while (about 1 second). A pip is heard and the power
is turned on.
2. Turn the alarm ON/OFF
1)Push and hold the SET switch for a while (about
1 second). The screen for setting the alarm ap-
pears.
2)Push the right (s) or left (t) shift switch to dis-
play the bell mark (
)
.
If the shift switch is pushed
again, the bell mark (
) disappears. While the
bell mark ( ) is displayed, the alarm is ON. While
the former is not displayed, the latter is OFF.
3)Push the SET switch to set the displayed item.
* When stopping setting halfway, push the POWER/
MEASURE switch.