Filter
Top Products
- Eng 26 -
English
KEY TO DISPLAY ICONS
Icon displayed Condition/Cause Corrective action
Insuffi cient pressure. Repeat measurement again.
Appears when the blood-
pressure could not be
measured accurately.
Reapply cuff properly and
measure again.
The pressure is 281 mmHg
or higher.
If the pressure does not
automatically decline during
measurement, immediately
press the “START/STOP”
switch and turn the unit off.
To take the measurement
again, refer to P.21 and
correctly re-apply pressure.
Appears when the batteries
are running low.
Replace the batteries.
Detected problem in the
device.
Ask purchased store.