Filter
Top Products
- Eng 12 -
English
REMOVING THE BATTERIES
• When the icon is displayed, or where the clock is no longer shown or nothing appears
in the display, replace the old batteries with four new ones. All four batteries should be
changed at once.
• The memory is erased if the batteries are removed for replacement. It is recommended to
make note of the data stored in memory prior to changing batteries.
• Do not use rechargeable batteries.
• Do not use alkaline and manganese batteries together.
• The monitor is powered by the batteries provided. Note that they may not last as long as
indicated.
• Batteries included are for demonstration purposes only. Battery life maybe shorter than
specifi ed.
• When disposing of used batteries, comply with governmental regulations or environmental
public institution’s rules that apply in your country /area.
RESETTING OPERATION
• When you put the Blood pressure monitor
in use for the fi rst time, be sure to press the
RESET switch mounted on the back of the main
unit to reset after loading the batteries in the
compartment.
• If the main unit fails to work normally while it is
in use, the normal state may be restored to the
unit by carrying out resetting operation.
• Resetting operation erases the entire data in
memory. The clock will re-start from 12:00am on
January 1, 2007.