Filter
Top Products
- Eng 23 -
English
AUTOMATIC CHANGEOVER FEATURE
• Press “START/STOP” switch after the completion of blood pressure measurement to
revert the display to the time display. If you do not press the switch and leave the unit, the
“Automatic changeover feature” of the unit will work approximately three minutes later to
automatically revert the display to the time indication. If you leave the unit for three minutes
without performing operations, the display will automatically changeover to the time
indication.
HOW TO CALL UP THE VALUES STORED IN MEMORY TO THE DISPLAY
• Except for the case where the unit is engaged in measurement, press “MEMORY” switch
to call up the values (measurement results) stored in memory to the display.
• The value stored in memory is numbered in the order of measurements. For example,
when 60 sets of data are stored in memory, the data number 1 represents the latest data.
• The number of measurements that can be stored in memory is 60 sets. Then, when
storing 61st data in memory, the 1st data stored in memory will be automatically deleted.
In this way, the unit automatically delete data stored in memory in order of storage to
accept new data.
• If you press “MEMORY” switch with no data stored in memory, the clock indication will
remain on the display.
Data number: 1, 2, 3 … … 59, 60
The earliest dataThe latest data
▲▲