Filter
Top Products
SKU 44006 For technical questions, please call 1-800-444-3353. Page 6
ject being pulled, and kink or fray the
cable.
6. Stand clear, and when it is safe to
do so, use the power Switch in the
Handle Base to retract the cable, and
hoist the item as desired.
7.
Figure 6
Wind the cable properly around the
spool.
8. Leave at least 3 turns of the cable
around the reel, to prevent the cable
from coming unattached to the reel.
9. If you are unable to lift a load, do not
continue to operate the power switch.
This can result in damage to the mo-
tor.
MAINTENANCE
1. Lubricate the cable occasionally with
a light oil. Check that it is in good
condition.
2. Check to be sure the hoist is properly
attached to its mounting pole. Make
sure the bolts are tight.
3. Periodically check the condition of the
electrical cords, plugs and controls.
PLEASE READ THE FOLLOWING
CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS
PROVIDED THE PARTS DIAGRAM IN THIS MANUAL
AS A REFERENCE TOOL ONLY: NETHER THE
MANUFACTURER NOR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND
TO THE BUYER THAT HE OR SHE IS QUALIFIED TO
MAKE ANY REPAIRS TO THE PRODUCT OR THAT
HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS
OF THE PRODUCT: IN FACT THE MANUFACTURER
A ND/OR DISTRIBUTOR EXPRESSLY STATES THAT
ALL REPAIRS AND PARTS REPLACEMENTS SHOULD
BE UNDERTAKEN BY CERTIFIED AND LICENSED
TECHNICIANS AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF
HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT
OR REPLACEMENT PARTS THERETO, OR ARISING
OUT OF HIS OR HER INSTALLATION OF REPLACE-
MENT PARTS THERETO.
Single Line
Conguration
440 lb.
Double Line
Conguration
880 lb.