Filter
Top Products
SKU 44006 For technical questions, please call 1-800-444-3353. Page 3
be caught in moving parts. Nonskid
footwear is recommended. Wear re-
strictive hair covering to contain long
hair. Wear appropriate work clothing.
8. USE EYE, EAR AND BREATHING
PROTECTION. Wear ANSI-ap-
proved impact safety goggles if you
are producing metal lings or wood
chips. Wear a NIOSH-approved dust
mask or respirator when working
around metal, wood, and chemical
dusts and mists. Use hearing protec-
tion when working in a loud or noisy
environment.
9. DO NOT ABUSE THE POWER
CORD. Protect the power cord from
damage, either from impacts, pulling
or corrosive materials. Do not yank
machine’s cord to disconnect it from
the receptacle.
10. DO NOT OVERREACH. Keep proper
footing and balance at all times. Do
not reach over or across running
machines.
11. MAINTAIN TOOLS WITH CARE.
Keep tools sharp and clean for bet-
ter and safer performance. Follow
instructions for lubricating and chang-
ing accessories. Inspect power cord
periodically and, if damaged, have it
repaired by an authorized technician.
Inspect all moving parts and mount-
ing bolts prior to use. Control handle
and power switch must be kept clean,
dry, and free from oil and grease at
all times.
12. REMOVE ADJUSTING KEYS AND
WRENCHES. Be sure that keys and
adjusting wrenches are removed from
the tool or machine work surface be-
fore operation.
13. AVOID UNINTENTIONAL START-
ING. Be sure that you are prepared
to begin work before turning the start
switch on.
14. STAY ALERT. Watch what you are
doing. Do not operate this machine
when you are tired.
15. DO NOT OPERATE THIS MACHINE
WHILE UNDER THE INFLUENCE
OF ALCOHOL, DRUGS, OR PRE-
SCRIPTION MEDICINES.
16. CHECK FOR DAMAGED PARTS.
Before using any tool, any part that
appears damaged should be carefully
checked to determine that it will oper-
ate properly and perform its intended
function. Check for alignment and
binding of moving parts, any broken
parts or mounting xtures, and any
other condition that may affect proper
operation. Any part that is damaged
should be properly repaired or re-
placed by a qualied technician.
17. REPLACEMENT PARTS AND AC-
CESSORIES. When servicing, use
only identical replacement parts,
which are available from Harbor
Freight Tools.
18. NOT TO BE USED FOR AIRCRAFT
PURPOSES.
19. NEVER LIFT PEOPLE AND ANI-
MALS OR HOIST LOADS OVER
PEOPLE.
Special Warnings when using this
Electric Hoist
1. Using this powerful tool may cre-
ate special hazards. Take particular
care to safeguard yourself and those
around you.