Filter
Top Products
SKU 44006 For technical questions, please call 1-800-444-3353. Page 2
SPECIFICATIONS
Capacity 440 lb. Single Cable,
880 lb. Double Cable
Line Speed 33 Feet/Minute
Cable Length 38’ Single Lift, 19’ Double Lift
Cable 9/64” diameter steel strands
Motor 1-1/8 HP, 3400 RPM
Power Supply 120 V~, 850 W
7.1 A, Single Phase, 60 Hz
Power Cord 3-prong grounded
Remote Switch 5.5’ Cable Length
Mounting Clamps 1-5/8” Diameter
Duty Cycle* 25%
*This Hoist has a 25% duty cycle. This
means that the hoist may only be run up to
2 minutes 30 seconds at a time and then it
must be allowed to rest for at least 7 min-
utes 30 seconds before further use.
CAUTION: To reduce the risk of electric
shock or injury, use indoors only.
Included Accessories
1. Mounting clamps for attaching hoist
to xed overhead or rotating support.
2. Remote Switch with water sealed
power switch, for safe operation.
3. 38’ steel wire cable with sheaved pul-
ley lift hook and weighted lift hook
4. Stabilizing weight on primary lift hook.
5. Built-in cable guide.
SAVE THIS MANUAL
You will need this manual for the
safety warnings and cautions, assembly
instructions, operating procedures, mainte-
nance procedures, trouble shooting, parts
list, and diagram. Keep your invoice with
this manual. Write the invoice number on
the inside of the front cover. Keep both
this manual and your invoice in a safe, dry
place for future reference.
SAFETY WARNING &
CAUTIONS
WARNING: When using powered equip-
ment, basic safety precautions should
always be followed to reduce the risk
of personal injury and hazards.
READ ALL INSTRUCTIONS BEFORE
USING THIS TOOL!
1. KEEP WORK AREA CLEAN. Clut-
tered areas invite injuries.
2. OBSERVE WORK AREA CONDI-
TIONS. Do not use tools in damp,
wet, or poorly lit locations. Don’t
expose to rain. Keep work area well
lit. Do not use electrically powered
equipment in the presence of am-
mable gases or liquids.
3. KEEP CHILDREN AWAY. Children
must never be allowed in the work
area. Do not let them handle ma-
chines, tools, or equipment.
4. STORE IDLE EQUIPMENT. When
not in use, tools must be locked up in
a dry location to inhibit rust. Always
lock up tools and keep out of reach of
children.
5. DO NOT FORCE THE TOOL. It will
do the job better and more safely at
the rate for which it was intended. Do
not use inappropriate attachments in
an attempt to exceed the tool’s ca-
pacities.
6. USE THE RIGHT TOOL FOR THE
JOB. There are certain applications
for which this product was designed.
Do not use a tool for a purpose for
which it was not intended.
7. DRESS PROPERLY Do not wear
loose clothing or jewelry, as they can
REV 05k; 08i; 08l; 09b