Filter
Top Products
17
CARE & CLEANING
DISASSEMBLING YOUR BLENDER
FOR CLEANING
Step 1.
Always ensure the Breville Blender is off by
pressing the ‘Power’ button on the control
panel. Then switch off at the power outlet
and unplug the power cord.
Step 2.
Remove the blender jug from the motor base
by grasping the handle and lifting the jug in
an upward direction.
Step 3.
Remove the lid and wash as per care and
cleaning instructions.
REASSEMBLING YOUR BLENDER
JUG AFTER CLEANING
Step 1.
Ensure all parts are clean and completely
dry thoroughly before placing blender jug
onto blender base.
CLEANING THE MOTOR BASE
Wipe the motor base with a soft, damp cloth
then dry thoroughly.
Wipe any excess food particles from the
power cord.
NOTE
Do not use abrasive scouring pads
or cleaners when cleaning the motor
base as they may scratch the surface.
CLEANING THE BLENDER JUG,
BLADES, LID AND INNER LID
Wash all parts in warm soapy water with
a soft cloth. Use a bottle brush to dislodge
stubborn foods around the blade assembly.
When cleaning the blender jug it is always
a good idea to clean straight away to avoid
food sticking to the blades and jug. Placing
about 200ml of warm soapy water into the
jug with the lid on and inner lid in place you
can blend this water for 5-10 seconds on a
low speed which will help clean the blades
and jug. Then rinse jug in cold water and dry
thoroughly.
NOTE
Blades are sharp please use care when
cleaning around the blades.
The blender lid may be washed in the
dishwasher on the top shelf only and on a
standard wash cycle. The blender jug may be
placed in the bottom shelf of the dishwasher
on a standard cycle only.
REMOVING STUBBORN OR STRONG
FOOD STAINS AND ODOURS
Strong smelling foods such as garlic, fish
and some vegetables such as carrots may
leave an odour or stain on the blender jug
and lid. To remove, soak blender jug and lid
for 5 minutes in warm soapy water. Then
wash with a mild detergent and warm water,
rinse well and dry thoroughly.
STORAGE
Store your Breville Blender upright with the
blender jug, lid and inner lid assembled and
inserted on the motor base or beside it. Do
not place anything on top.
WARNING
The blending blades are extremely
sharp. Avoid any contact with fingers
and hands. Use caution when handling
and storing.