Filter
Top Products
11
OPERATING YOUR BREVILLE KINETIX
®
CONTROL
FUNCTION PROGRAMMED TIME
Smoothie 60 seconds (1 minute)
Ice / Crush 60 seconds (1 minute)
When ‘00’ seconds is reached, the blender
will automatically cease to operate and
the function button and ‘Stop’ button
illumination will go out. The ‘Power’ button
will illuminate and flash.
NOTE
The smoothie function has a unique
processing technique that blends the
denser ingredients at a lower speed,
then increases as ingredients thicken.
This may happen several times while
blending smoothies.
To stop blending at any time, press the
‘Stop’ button or the selected function button.
The ‘Power’ button can also be pressed, but
this will also turn the appliance off and all
illuminations will go out.
The maximum amount of ice cubes the
blender can blend at any one time is 1
standard ice tray or 250g.
WARNING
Never place anything other than food
and liquids in the blender whilst the
motor is running.
Step 9
For ingredients that require short bursts
of power, select the ‘PULSE’ function. The
‘PULSE’ button will illuminate and remain
illuminated while the button is depressed.
When this function is selected, the LCD
timer screen will illuminate and count
upwards in one second increments during
pulsing. Press the ‘PULSE’ button in short
bursts until blending is complete.
NOTE
Use the ‘PULSE’ button when the
food that is being processed is too
thick or coarse to circulate within the
blender jug.
Step 10
At the end of use, always ensure the blender
is turned off by pressing the ‘Power’
button on the control panel. Then switch
the appliance off at the power outlet and
unplug the cord. Ensure the motor and
blades have completely stopped before
attempting to move the appliance, or when
the Breville Blender is not in use and before
disassembling, cleaning and storing.
NOTE
• During the blending process,
ingredients may stick to the sides
of the blender jug. To push the
food back onto the blades, press
the ‘Power’ button on the control
panel and switch off at the power
outlet and remove the power cord.
Remove the lid and use a plastic
spatula to scrape down the sides
of the jug. Replace the lid before
recommencing blending.
• If any moisture or liquid appears
on top of the motor base during
blending, press the ‘Power’ button
on the control panel, switch off at
the power outlet and remove the
power plug. Remove the blender jug.
Wipe the motor base immediately
with a dry cloth or paper toweling to
absorb the liquid. Check the blender
jug is correctly assembled.
• Never place anything other than
food and liquids in the blender
whilst the motor is running.