Page 41
Maintenance and Lubrication
Proper maintenance is necessary to ensure
safe, troublefree operation. Inspecting the lift for
any wear, damage or other abnormal conditions
should be a part of all transit agencies's daily
service program. Simple inspections can detect
potential problems.
The maintenance and lubrication procedures
VSHFLÀHGLQWKHIROORZLQJVFKHGXOHmust be per-
formed by a Braun authorized service represen-
tative at the scheduled intervals according to the
number of cycles.
NVL Series lifts are equipped with hardened pins
and self-lubricating bushings to decrease wear,
provide smooth operation and extend the service
life of the lift.
When servicing the lift at the recommended
intervals, inspection and lubrication procedures
VSHFLÀHGLQWKHSUHYLRXVVHFWLRQVVKRXOGEH
repeated. Clean the components and the sur-
rounding area before applying lubricants.
LPS2 General
Purpose Penetrating
Oil is recommended
where Light Oil is
called out. Use of
improper lubricants
can attract dirt or
other contaminants
which could result
in wear or damage
to the components.
Platform components
exposed to contami-
nants when lowered
to the ground may
require extra attention.
Lift components requiring grease are lubricated
during assembly procedures. When these compo-
nents are replaced, grease must be applied during
LQVWDOODWLRQSURFHGXUHV6SHFLÀHGOXEULFDQWVDUH
available from The Braun Corporation (part num-
bers provided on page 42).
Maintenance and lu-
brication procedures
must be performed
DVVSHFLÀHGE\DQ
authorized service
technician.
Failure to do so may
result in serious
bodily injury and/or
property damage.
W
A
RNING