Page 36
Stroking
Hand
Pump
Up (To Raise):
Open
(Down)
Close
(Up/Stop)
Manual Operating Instructions
E
Using hand pump handle:
1. Place slotted end of pump han-
dle onto backup pump release
valve and turn clockwise to
close securely. See Photo D.
Note: Valve must be tight, but
do not overtighten.
2. Insert handle into backup
pump and stroke until platform
reaches ÁRRUOHYHO(see Photo
E).
To Fold Platform (In):
Insert handle into backup pump
and stroke until platform stops
(folds fully). See Photo E.
D
Remove pump cover to access
hand pump and pump handle as
outlined on page 33. Refer to
release valve photos and illustra-
tion on page 34.
Note: Close backup pump
release valve securely before
operating electric pump.
Store pump handle and install
pump cover as outlined on page
37.