Braun L200UARS Wheelchair User Manual


 
Page 10
Lift Operation Safety
Lift Operation Safety Precautions (continued)
W
A
RNING
W
A
RNING
W
A
RNING
Do not use the outboard roll stop as a barrier (brake). Stop and brake wheelchair when
loading onto the platform (manually stop and brake manual wheelchairs — stop powered
wheelchairs with the wheelchair controls).
Turn powered (electric) wheelchairs off when on lift platform.
Press the DOWN switch until the entire platform rests on ground level (lowered fully) and
the outboard roll stop is fully unfolded (ramp position) before loading or unloading a passen-
ger at ground level.
Outboard platform roll stop must be fully unfolded (ramp position) until the entire wheelchair
(or standee) crosses roll stop when loading or unloading at ground level.
Do not overload or abuse. The load rating applies to both the raising and lowering func-
tions - continuous lifting capacity is 800 lbs.
Do not operate or board your lift if you or your lift operator are intoxicated.
W
A
RNING
W
A
RNING
W
A
RNING
Platform must be positioned at floor level (bridge plate height) when loading or unloading in
and out of vehicle.
The wheelchair-equipped torso restraint belt must be properly positioned and engaged
before loading onto the wheelchair lift platform.
W
A
RNING
W
A
RNING