Filter
Top Products
Troubleshooting
120 Nio® medical display systems
5. Select the “Adapter” tab and then click on the “List All
Modes” button. Select the resolution and refresh rate that
your BarcoMed Nio display supports from the dialog box and
click “OK”.
Tip: In the Adapter box, the Adapter string shows if this
display is the First View or the Second View attached to the
display controller. Please make a note of this, so that you can
arrange the displays in the correct order later if necessary.
6. Click “OK” on the bottom of the Adapter Control Panel. If the
“OK” button on the bottom of the Adapter Control Panel is
not visible, press the “TAB” key once and then press
“CTRL”+“Enter” to select “OK”.
7. Click “OK” in the “Windows will now apply your new
desktop settings” dialog box. Your BarcoMed Nio display
should now synchronize and display the Windows desktop.
8. Click “Yes” when asked, “Your desktop has been
reconfigured. Do you want to keep these settings?”
To set the resolution of the second display attached to the
BarcoMed display controller you are working with, go back to the
“Settings” tab of the “Display Properties Control Panel”. Attach
the display you detached in step 2 above, by right clicking on the
rectangle that represents it and selecting “Attached”.
Now repeat steps 5-8 above for this display.
If you are using a Quad-Head Configuration repeat all of the
above steps for the two displays on the second display controller.
Tip: After installing DualView and setting the resolutions in a
Quad-Head Configuration you may need to drag the heads into
the proper position in the window on the “Settings” tab, so that
the arrangement in the window on the “Settings” tab matches
the physical arrangement of your configuration.