Filter
Top Products
Page 11
ENGLISHENGLISH
ENGLISHENGLISH
ENGLISH
Heavy
Normal
Delicate
Iron dry
Timed dry
Air fluff
Programs
Power
Time set
Wrinkle free
Delay
Temperature
Signal
Quick cool-down
LED Window
Displays program number, dry time
selected, remaining program time, etc.
Power Button
Turns power to
the machine on
and off.
Power Indicator
Light
Glows when the
power is turned on.
Start Button
Press to start a
program.
POPO
POPO
PO
WER BUTTWER BUTT
WER BUTTWER BUTT
WER BUTT
ONON
ONON
ON
The Power button turns the power to the machine on
and off. When the power is on, the power indicator light
glows red. The power must be on before you can start
the machine.
PRPR
PRPR
PR
OGRAM KNOBOGRAM KNOB
OGRAM KNOBOGRAM KNOB
OGRAM KNOB
Turn this knob to select a program. The programs are
described on the following page.
12:00 Position – This is where the line on the knob
aligns with the line above the knob. When the knob is in
this position, “00” displays on the LED to indicate no
program has been chosen.
STST
STST
ST
ARAR
ARAR
AR
T BUTTT BUTT
T BUTTT BUTT
T BUTT
ONON
ONON
ON
After you have selected a program and the desired
options, press this button to start the dryer. The red
indicator light next to the Start button will come on. The
indicator light will go off when the program ends or has
been cancelled.
STST
STST
ST
OP BOP B
OP BOP B
OP B
UTTUTT
UTTUTT
UTT
ONON
ONON
ON
You can stop or cancel a program by pressing and
holding the Stop button until the dryer stops. When you
press Start, the program will start from the beginning.
INTERRINTERR
INTERRINTERR
INTERR
UPTING OR CANCELLINGUPTING OR CANCELLING
UPTING OR CANCELLINGUPTING OR CANCELLING
UPTING OR CANCELLING
A PRA PR
A PRA PR
A PR
OGRAMOGRAM
OGRAMOGRAM
OGRAM
To interrupt a program, simply open the door. The dryer
will stop tumbling automatically. To continue the
program, close the door and press Start. The program
will continue from the point it was interrupted.
To cancel a program, press and hold the Stop button
Program Knob
Turn to select a program.
Stop Button
Press and hold for
approximately 3 seconds to
cancel a program
THE CONTRTHE CONTR
THE CONTRTHE CONTR
THE CONTR
OL POL P
OL POL P
OL P
ANELANEL
ANELANEL
ANEL
until the Stop indicator light goes off (approximately 3
seconds). You will have to reselect a program and press
Start to restart the dryer.
LED WINDOWLED WINDOW
LED WINDOWLED WINDOW
LED WINDOW
The LED window displays the program number for the
Sensidry programs, as illustrated below:
P1
The corresponding program numbers are:
Heavy = P1 Delicate = P3
Normal = P2 Iron Dry = P4
When you select Timed Dry, the LED displays the
number of minutes selected, plus the cool-down time,
as illustrated below:
20
When you select Air Fluff, the LED displays the number
of minutes selected, as illustrated above. With both
programs, Timed dry and Air fluff, as the program
advances, the LED displays the remaining time.
“End” on the LED indicates the program is complete.
“C” indicates the program is in the cool-down cycle.
Option Buttons
Press to select a
program option.
T741C OPERAT741C OPERA
T741C OPERAT741C OPERA
T741C OPERA
TING INSTRTING INSTR
TING INSTRTING INSTR
TING INSTR
UCTIONSUCTIONS
UCTIONSUCTIONS
UCTIONS
WARNING! To reduce the risk of electric shock or injury to persons, read the ”Important Safety
Instructions” section on page 2 before operating this appliance.