A&D UA851TMW Blood Pressure Monitor User Manual


 
A&D Medical (Toll-Free): 1-888-726-9966 | Page E-2
What Display Symbols Mean
Display/
Symbol
The symbol shown while measurement
is in progress. It blinks while detecting
the pulse.
An irregular heartbeat or body
movement may have occurred. Refer
to page E-9 for more information on
irregular heartbeats.
The battery power indicator is
displayed during measurement.
The batteries are low when it blinks.
Unstable blood pressure due to
excessive body movement.
The systolic and diastolic values are
within 10 mmHg of each other.
The pressure value did not increase
during inflation.
The cuff is not fastened correctly.
There is an air leak in the cuff or
monitor.
The pulse was not detected correctly.
Cuff Inflation Meter
Pressure Rating Indicator
123
123
123
123
123
123
123
123
123
123
123
123
err CUf
p-3
1932-1AIc UA787EXC¥06 illust¥03,12p
123
123
123
123
123
123
123
123
123
123
123
123
err CUf
p-3
1932-1AIc UA787EXC¥06 illust¥03,12p
123
123
123
123
123
123
123
123
123
123
123
123
err CUf
p-3
1932-1AIc UA787EXC¥06 illust¥03,12p
123
123
123
123
123
123
123
123
123
123
123
123
err CUf
p-3
1932-1AIc UA787EXC¥06 illust¥03,12p
Battery Full
123
123
123
123
123
123
123
123
123
123
123
123
err CUf
p-3
1932-1AIc UA787EXC¥06 illust¥03,12p
Battery Low
123
123
123
123
123
123
123
123
123
123
123
123
err CUf
p-3
1932-1AIc UA787EXC¥06 illust¥03,12p
PULSE DISPLAY ERROR
123
123
123
123
123
123
123
123
123
123
123
123
err CUf
p-3
1932-1AIc UA787EXC¥06 illust¥03,12p
Condition/Cause Recommended
Action
Measurement is in progress,
remain as still as possible.
Take measurement again and
consult with your physician.
Replace all batteries with new
ones when the symbol blinks.
Alkaline batteries recommended.
Try the measurement again.
Remain very still during the
measurement.
Fasten the cuff correctly, and try
the measurement again.
Check for air leaks along the tube
and around the air socket.
Refasten the cuff and retake
measurement.
Make sure tube is properly
connected to cuff and monitor.
Try the measurement again.
Remain very still during the
measurement.
Measurement is in progress,
remain as still as possible.
Refer to the section “About
Pressure Rating Indicator” for
further explanation.