Filter
Top Products
HV-WP/HW-WP Series Page 23
9. Percentage Mode
9.
9.9.
9. Percentage Mode
Percentage ModePercentage Mode
Percentage Mode
The percent mode is the function to display a mass value in the unit of "%".
Store a 100% mass value, in advance, to use this function.
9.1.
9.1.9.1.
9.1. Storing a 100% Mass
Storing a 100% MassStoring a 100% Mass
Storing a 100% Mass
Step 1 Press the MODE switch to display the unit %.
Step 2 Press the SET switch to enter the mode that stores
a 100% mass.
Step 3 With nothing on the weighing pan, press the ZERO
switch to display zero.
Step 4 Place the 100% mass on the weighing pan gently.
Press the
ENTER switch, to store the 100% mass
after the stability mark is displayed. Then the
percentage is displayed.
Caution
When the sample is too light and it is not possible
to calculate a 100% mass, the scale displays
lo .
lo .lo .
lo .
and returns to step 3.
Pressing the ENTER switch after
lo
lo lo
lo
is displayed,
the next unit is displayed.
Step 5 Remove all things from the weighing pan.