Filter
Top Products
46
13-5. Connecting the AD-8121 Printer / MODE 3
When using MODE 3 of the AD-8121 printer, printouts are obtained using the
PRINT key (f-06-01 = 0), or auto-print mode A/B (f-06-01 =2 or 3).
The total data (accumulated by the M+ key) will be printed along with the
number of additions to M+ memory.
The AD-8121 / MODE 3 does not have statistical functions.
AD-8121 Printout Sample
MODE 1 MODE 3
13-6. Command Mode
In the command mode, the scale is controlled by commands that come from an
external device, computer etc.
Do not set f-06-01="1" (stream mode) to use with the command mode. if you don’t
want to use command mode together with key mode or auto-print mode, set
f-06-01="4" (command mode only).
Use an optional cable below to connect with a computer.
AX-KO577A-200 RS-232C cable, for D-sub 25 pin, length 2m
AX-KO1786-200 RS-232C cable, for D-sub 9 pin, length 2m
(These cable have a DIN 7pin connector, but it can connect with the OP-03.)
ID. Number
pcs (Count)
Weight
Unit Weight
No. of Accum.
TOTAL
473&
:7NJ
8:J
473&
:7NJ
8:J
$43&
,'
473&
67NJ
8:J
,'
473&
67NJ
8:J
1
727$/
3&
A
X-KO1786-200
D-Sub 9 pin DIN 7 pin
female connector connector
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9
A
X-KO577
A
-200
D-Sub 9 pin DIN 7 pin
female connector connector
1 1
2 2
3 3
4 4
5 5
6 6
7 7
(Other pins: N.C.)