Filter
Top Products
26
5. Press the ENTER key to save the setting
and move to next F-Function, f-05-02.
6. Continue to enter f-05 comparator settings
– refer to “9-2. F-Functions” for a listing. If
there are no changes to a F-Function, press
the ENTER key to move to the next.
7. When finished: press the ON/OFF key to exit. Then,
press it to turn the display back ON. Comparator
functions and limits will now operate as set.
Viewing Comparator Limits
The comparator limits you are using will be shown by pressing the ½ key.
Set f-09-01="0" to use this mode.
1. Press the ½ key, then upper limit
will be shown.
2. Press the ½ key again, then lower
limit will be shown.
3. Press the ½ key. The display will
return to normal.
Changing Comparator Limits Instead of Setting the F-Function
Set f-09-01="0" to use this mode.
1. To change the upper limit, use the 0
Æ 9 10-key pad to display new
limit in step 1 above, and press the
ENTER key. Then new limit is
memorized and the lower limit will
be shown.
2. To change the lower limit, use the 0
Æ 9 10-key pad to display new
limit, and press the ENTER key.
Then the display will return to normal
with the new limit.
Pressing the ½ key to go to next step,
the input data is not memorized.
These limits are held in memory even if power
to the scale is switched off.
8f-05-02
8
8Clear
8
8
aidal00
00
ENTE
R
To ENTER
or
MOVE to next
ENTE
R
ENTE
R
888.8.-102
COUN
T
WEIGHT UNIT
WEIGHT
8
8-0.000
8
8
11Hi00
U
pp
er limit
888
.
8.-102
COUN
T
WEIGHT UNIT WEIGHT
8
8-0.000
8
8
11Hi00
ENTE
R
888.8.-198
COUN
T
WEIGHT UNIT WEIGHT
8
8-0.000
8
8
11lo00