Filter
Top Products
26
Item
Function number
Description
f11- 0
f11- 1
Stability detection
width
f11- 2
Narrow
Wide
f12- 0
f12- 1
Stability detection
time
f12- 2
Short
Long
Condition to
detect stability
f13- 0
Zero tracking OFF
Zero tracking
f13- 1
Zero tracking ON
f14- 0
All keys enabled
f14- 1
ON/OFF, ZERO, TARE, SAMPLE &
PRINT/ENT only enabled.
Key operation
f14- 2
ON/OFF, ZERO & TARE only enabled
Simplified
operation
available
f15- 0
f15- 1
f15- 2
f15- 3
f15- 4
f15- 5
f15- 6
f15- 7
Comparator light
brightness
f15- 8
Dark
Bright
Brightness
control
f16- 0
Simple weighing display mode
f16- 1
Target weighing display mode
f16- 2
Limit check weighing display mode
Analog sweep
display when
powered on
f16- 3
Display off
f17- 0
Always OFF
f17- 1
Always ON
f17- 2
Turns off after 30 sec. weight stability
LCD backlight
f17- 3
Turns off after 60 sec. weight stability
Weight change
or key operation
turns on.
f18- 00
00 RS-232C must be set to this.
Serial interface
Address
f18- ## ## = 01~99 RS-422/485
f19- 0
RS-232C
f19- 1
RS-422
Serial interface
f19- 2
RS-485
Optional RS-
232C/422/485
f20- 0
Reply to the command is sent.
f20- 1
No reply to the command.
F6-1
Serial interface
operation mode
f20- 2
UFC format F6-2, 3 or 4
Factory setting