A SERVICE OF

logo

ZQ110
Rev. 1.00
- 67 -
Mobile Printer Command Manual
<Function 48> GS ( L pL pH m fn (fn=0, 48)
[Format]
[Range]
[Description]
ASCII
GS
(
L
pL
pH
m
fn
Hex
1D
28
4C
pL
pH
m
fn
Decimal
29
40
76
pL
pH
m
fn
(pL + pH x 256) = 2 (pL=2, pH=0)
m=48, fn=0, 48
Transmits the total capacity of the NV bit-image memory (number of bytes
in the memory area).
Hexadecimal
Decimal
Amount of Data
Header
37H
55
1 byte
Flag
30H
48
1 byte
Data
30H - 39H
48 - 57
1 - 8 bytes
NUL
00H
0
1 byte
The total capacity data is converted to character codes corresponding to
decimal data, then transmitted from the MSB.
<Function 50> GS ( L pL pH fn (fn=2, 50)
[Format]
[Range]
[Description]
[Notes]
ASCII
GS
(
L
pL
pH
m
fn
Hex
1D
28
4C
pL
pH
m
fn
Decimal
29
40
76
pL
pH
m
fn
(pL + pH x 256) = 2 (pL=2, pH=0)
m=48, fn=2, 50
This command prints the graphics data defined by the process of
Function 112.
The graphics data stored in the printer buffer is printed.
This command is available in standard mode, not in page mode.
The graphics data is defined by Function 112.
The required amount of line feed pitch is used for printing graphics data,
regardless of the existing setting value of the pitch.