109
Symptom
• No effects.
Possible Causes
• Are the effect send levels set properly (pages
35 and 39)?
• Are the effect return levels set properly (pages
32, 33 and 41)?
• Is “NO EFFECT” or “THRU” selected as the
effect type (pages 90 – 92 and 94)?
• If distortion is being used, is the distortion part
turned “off” (page 94)?
Symptom
• A connected breath controller has no effect.
Possible Causes
• Is the Breath Mode parameter set properly
(page 96)?
• Is the breath control number set properly (page
96)?
• Are the parameters to be controlled by the
breath controller set properly (page 48)?
• If the VL70-m is connected to a computer via
the TO HOST connector, is the computer “echo
back” function set properly (page 20)?
• Is the receive channel parameter set properly
(pages 34 and 38)?
Symptom
• A connected WX-series controller has no effect.
Possible Causes
• If the VL70-m is connected to a computer via
the TO HOST connector, make sure that the
“WX” is selected via the [MIDI/WX] button
(page 18).
• If the VL70-m is connected to a computer via
the TO HOST connector, is the computer “echo
back” function set properly (page 20)?
• Is the Breath Mode parameter set properly
(page 96)?
• Is the breath control number set properly (page
96)?
• Are the parameters to be controlled by breath
data from the WX-series controller set properly
(page 48)?
• Is the receive channel parameter set properly
(pages 34 and 38)?
Symptom
• Cannot receive MIDI bulk data.
Possible Causes
• Is the Receive System Exclusive parameter
turned “on” (page 98)?
• Is the Device Number parameter set properly
(pages 32 and 41)?
Symptom
• Song data is not played properly.
Possible Causes
• Is the WX Lip Lock parameter set properly
(page 98)?
• Is the Breath Setting Lock parameter set
properly (page 96)?
• In some cases song data which has not been
specifically created for playback via the VL70-
m, or song data which does not bear the “VL
Extension for XG” logo, will not play back
properly on the VL70-m.
Appendix
