20 GL-1010 Administrator’s Guide
The Apply Changes Check screen is displayed any time
controller settings change:
5 If you are finished changing controller settings press YES.
Otherwise, press
NO to continue your session. Once the
controller reboots, a configuration page prints out. Verify that
the settings were changed successfully.
Setting Up WINS and DNS Servers
1 From the TCP/IP Setting menu, press the PAGE DOWN softkey.
The
TCP/IP Setting: Servers screen is displayed:
2 Press PRIMARY or SECONDARY field for WINS Servers or DNS
Servers to give focus.
Press the PAGE UP soft key to
return to the TCP/IP Setting screen.
NOTE:
If you have DHCP enabled,
it obtains WINS and DNS
server information
automatically. However,
any information entered on
the Server Settings screen
overrides the settings
acquired by DHCP.
