GL-1010 Administrator’s Guide 75
Device Copier Settings
This page allows you to change the following copier settings:
n The Auto Clear features allows you to specify when the
copier should automatically returns to the default screen and
settings.
n The Auto Power Save feature controls when the copier enters
into a Power Saving Mode based on inactivity.
n The Auto Power OFF feature controls when the copier
actually shuts off after a defined period of inactivity.
n The Maximum Copies setting allows you to set the maximum
number of copies that can be made during a single copy job.
Please note that the Output tray may need clearing if the
actual number of pages copied exceeds the output tray
capacity.
n The Auto 2-Sided Mode setting allows you to set duplex
mode for the selected device to conserve paper. The settings
include requiring multi-page 1-sided jobs to be printed using
both sides of the paper, or 2-sided jobs to be printed on both
sides of the paper (no change), or allow the user to set the
parameters at their own workstation.
n The Book double-sided Original Selection feature allows you
to specify that when the Book Copy feature is selected,
output is located in the specified order on each page and
printed. This does not affect other copy or print jobs.
n The Date Format setting allows you to specify the format for
displaying the Date for the selected copier.
