Getting Started
1-9
• Four Slot Spare Battery Charger on page 8-17
• Universal Battery Charger (UBC) on page 8-28.
Charging the Main Battery
You can charge the main battery in the mobile computer using a cradle, the CAM with a charging
cable, or the MSR with the appropriate power supply.
1. Ensure the accessory used to charge the main battery is connected to the appropriate power
source (see Chapter 8, Accessories for setup information).
2. Insert the mobile computer into a cradle or attach the appropriate snap-on module.
3. The mobile computer starts to charge automatically. The amber charge LED, in the Indicator
LED Bar, lights to show the charge status. See Table 1-1 for charging indications.
The main battery usually fully charges in less than four hours.
Charging Spare Batteries
The mobile computer has three accessories that can be used to charge spare batteries.
• Single Slot Serial/USB Cradle
• Four Slot Spare Battery Charger
•UBC Adapter.
To charge a spare battery:
1. Ensure the accessory used to charge the spare battery is connected to the appropriate power
source (see Chapter 8, Accessories for setup information).
Table 1-1. Mobile Computer LED Charge Indicators
LED Indication
Off Mobile computer not in cradle/CAM/MSR; mobile computer not placed correctly;
charger is not powered.
Fast Blinking Amber Error in charging; check placement of the mobile computer.
Slow Blinking Amber Mobile computer is charging.
Solid Amber Charging complete.
Note: When the battery is initially inserted in the mobile computer, the amber LED
flashes once if the battery power is low or the battery is not fully inserted.
