SELF-TEST
The “self-test” is a trial run of your beautiful new machine.
SR-lo/15 carries a built-in program that prints out sample lines
of letters, numbers, and other characters - to show you that
everything’s in good working order. It also serves as a display
of the characters available in the SR-10/15. And finally, it’s a
“warm-up” that permits you to check your installation of ribbon
and paper, and the adjustment of the print head gap.
Best of all, you don’t have to wait another minute - you can
print the self-test without hooking up the SR-lo/15 to your
computer! It’s as simple as 1, 2, 3...
1. Plug the printer’s power cord into an electrical outlet.
2. Insert a sheet of paper (or sprocket paper, either one).
3. While holding down the LF button, turn the power switch
on.
-
-
-.
Were you surprised? It’s speedy, isn’t it? 200 characters a second,
to be exact (when printing normal pica type).
-
-
-
-
-
Figure 2-10. SR-10/15’s self-test gives a preview of its capabilities.
