Figure l-l. Inside the carton you should have received: 1) SR-lo/15
-
printer, 2) cut sheet guide, 3) continuous paper guide, 4) power cord, 5)
platen knob, 6) spare fuse, 7) ribbon cartridge, and 8) this user’s manual.
-
Let’s move on the next step . . .
-
d
m Removing the printer covers
What are covers for, really? Primarily, for two reasons: one,
-
to keep dust and dirt away from the delicate “innards,” and two,
to keep the noise level down. The front cover must be on or
-
SR-lo/15 will not print. So, you should keep the covers on all
the time, except when setting the ink ribbon cartridge in place,
-
loading paper, or making other adjustments when the cover might
be in the way.
-
SR-lo/15 has ~WU covers, front and back. Both operate in the
same way. To remove them, lift up the free end (nearest the center
of the printer) so that the cover makes approximately a 45” angle
-
----~___- - ____ -.----
2
_
