SEITING UP
Place the printer in the desired location, and remove all packing material from the printer.
This packing material isintended to prevent damage to the printer while intransit. You will
wantto keep allthe packingmaterial, along withtheprinter carton, incase youhave tomove
the printer to a new location.
Connecting the power supply
You can use either the AC adapter or the optional NiCd battery pack to supply the power
to the printer.
The procedure to connect the AC adapter is:
1. Plug the AC adapter into a properly grounded AC outlet.
2. Attach the AC adapter cable to the printer. Whenever connecting the AC cable, the
carriage moves and the print head is-recapped automatically. -
a
3
\
, A
\
F 2 C a c p
The procedure to install the optional NiCd battery pack is:
1. Turn the printer upside down and turn the printer stand.
2. Open the battery compartment by pushing the two recesses as shown in Figure 2-3.
F 2 O b c a t p u d p s
8
