CLIE Operating Instructions
Communicating using your CLIÉ handheld
88
nN
Beaming information
You can beam a record, business card, or category of records between your CLIÉ handheld and another
Palm™ OS PDA.
To beam data from your CLIÉ handheld to another Palm™ OS PDA, proceed as follows:
1 Locate the record, business card, or category you want to beam.
2 Tap the Menu icon.
3 Tap one of the following from the Record menu:
The Beam command for an individual record
In Address Book only: Beam Business Card
Beam Category.
4 When the Beam dialog box appears, point the IR port directly at the IR port of the receiving handheld.
5 Wait for the Beam dialog box to indicate that the transfer is complete before you continue working on
your CLIÉ handheld.
For best results, your CLIÉ handheld and another Palm™ OS PDA should be 4 to 8 inches (approximately 10 to 20 centimeters) apart, and the path
between the two handhelds must be clear of obstacles and shielded from fluorescent lighting. Beaming distance to other Palm™ OS PDA handhelds
may be different.
your
