44 SANRAD V-Switch User Manual
Powering Up
You can power up the V-Switch 3000 once you have connected and
powered up the storage devices. The V-Switch 3000 contains a storage
auto-discovery function. At power- up the V-Switch 3000 automatically
scans for and registers all attached and powered up network storage
devices. Therefore, power up all storage devices before powering up the V-
Switch 3000. Storage devices added after V-Switch 3000 power- up will be
registered in the next V-Switch 3000 storage network scan.
The V-Switch 3000 contains two removable auto-switch 100V/230V AC
redundant power supplies.
Redundant
Power Supplies
10242
Figure 24. V-Switch 3000 Power Supplies
Reconfirm that all storage devices are powered up and connected to the V-
Switch. Plug the power cables into the V-Switch 3000 power supplies and
then into the power source. Push the power switch to the ON position. The
V-Switch 3000 powers up.
The Power indicator LED on the front right of the V-Switch 3000
turns green.
Each network port 1 Gb indicator LED turns green only if
connected to the network and operating at 1 Gb.
Each storage port indicator LED on the front right of the V-Switch
3000 is green if connected to storage.
The fans start operating.
The LCD panel displays “V-Switch 3000 SANRAD Corp.”
You are now able to initialize the V-Switch 3000.
