72 2E. Calendar & Tools
5.
Select a start and end time for the event by
touching the corresponding
Start or End fields.
6. Assign an hour and minute by either:
Ⅲ Scrolling through both reels (Hours and Minutes)
by sliding your finger up and down on the screen.
Ⅲ Touching the arrows above/below each field.
Ⅲ Touch either am or pm.
Ⅲ Once you are done setting the times, touch Done.
7. Select an alert time for the event by touching the
Alert field and touching one of the following
options:
Ⅲ Select On Time, 5 minutes before, 10 minutes
before, 15 minutes before, 30 minutes before,
1 hour before, 3 hours before, 5 hours before, or
1 day before.
8. Select a ringer type for the alarm by touching
Set Ringer and then selecting a sound file.
Ⅲ Touch to play a sound sample for a selected
ringer.
Ⅲ If a ringer has been previously selected, scroll
through the list of available ringer sounds and
touch a ringer name to re-assign it.
Tip: Touching and holding down on the arrows (up or down)
increases the speed at which the numbers scroll through
each reel.
Note: If you need to adjust the end date for an event, touch
the date field and select a new end date by touching a
day from the onscreen calendar.
M350.book Page 72 Monday, October 11, 2010 9:58 AM
