Changing Your Settings 78
Alert type
This menu allows you to specify how you are informed of incoming calls. Use the Right or Left key to select a Ring
tone type.
The following options are available:
–
Melody
: the phone rings using the ring melody selected in the
Ring tone
menu.
–
Increasing melody
: the melody volume increases.
–
Vibration
: the phone vibrates but does not ring.
– Melody and vibration
: the phone plays the melody and vibrates simultaneously.
–
Increasing and vibration
: the melody volume increases and vibrates simultaneously.
–
Vibration then melody
: the phone vibrates 3 times and then starts ringing.
– Melody then vibration
: the phone plays the melody and then vibrates.
Message tone
This menu allows you to set up the ringer for incoming messages. You can set the Tone, Alert type, and Repetition.
ᮣ
Use the Left or Right Navigation keys to make your selections.
Keypad tone
This menu allows you to select the key tone and volume that the phone sounds when you press a key.
1. Highlight
Volume
and press the
Left
or
Right
Navigation keys to adjust the volume.
2. Select
0
to turn the sound off.
3. Press
Save
to confirm your selections.
Power-on/off tone
This menu allows you to select the melody that the phone sounds when it is switched on and off.
ᮣ
Select
On
to turn the sound on, select
Off
to turn the sound off, then press the
Save
soft key to confirm your
selection.
t119.book Page 78 Wednesday, December 10, 2008 3:24 PM
