Getting Started
20
4. Unplug the adapter from the power outlet and disconnect it from the
phone by gently pulling the connector out of the jack.
Note: To avoid damaging the phone, you must unplug the adapter before removing the battery
from the phone.
Note: The phone is also charged when connected to the USB port of a PC using the USB cable.
Low Battery Indication
When only a few minutes of talk time remain, a warning tone sounds, the
“Low Battery” message appears on the display and the empty battery icon
flashes. The backlight dims to conserve the remaining battery power.
When the battery level becomes too low, the phone automatically turns off.
Recharge the battery to restore phone operation.
Switching the Phone On and Off
To switch the phone on:
1. Open the phone.
1. Press and hold [ ] until the phone switches on.
2. If prompted, enter the password and press <OK> or [ ]. For further
details, see the Security option in “Set Phone” on page 122.
3. If prompted, enter the PIN and press <OK> or [ ]. For further details,
see the Check PIN Code section in “Set Phone” on page 122.
The phone searches for your network and, after finding it, the Idle
screen appears on the display. You can now make and receive calls.
The default display language setting is Automatic, which is dependent
on the setting in your SIM. For further details or to change the
language, see the Language section in “Set Phone” on page 122.
