![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/a/6c/a6c73a07-6d7a-45f5-a7ca-106a4bb5216c/a6c73a07-6d7a-45f5-a7ca-106a4bb5216c-bg27.png)
DVD camcorder mode:
recording/playback
RECORDING MOVIE IMAGES
• You should set the Storage mode switch to
DISC before recording on a disc.
(SC-DX103/DX105 only)
page 30
• You can record movie images using the remote
control. (SC-DX105 only)
page 13
• This DVD camcorder provides two Recording
start/stop buttons. One is on the rear side of the
camcorder and the other is on the LCD panel.
Select the Recording start/stop button that
works best for you
.
1. Turn the DVD camcorder on.
• Connect a power source to the DVD camcorder.
(A battery pack or an AC power adaptor)
• Slide the POWER switch downwards to turn
the DVD camcorder on.
• Set the Storage mode switch to DISC.
(SC-DX103/DX105 only)
page 30
2. Check the subject on the LCD screen.
(Lens and LCD)
• Set the Lens open/close switch to open
( ).
page 10
3. Press the Recording start/stop button.
• The (
) recording indicator will display, and
recording will start.
• Press the Recording start/stop button
again to stop recording.
4. When recording is fi nished, turn the DVD camcorder off.
modo de videocámara con DVD:
grabación / reproducción
GRABACIÓN DE IMÁGENES DE VÍDEO
• Debe colocar el interruptor del Modo de
almacenamiento en DISC antes de grabar un
disco. (sólo SC-DX103/DX105)
página 30
• Puede grabar imágenes de video utilizando el
mando a distancia. (sólo SC-DX105)
página 13
• Esta videocámara con DVD proporciona dos
botones Iniciar/Parar grabación. Uno se
encuentra en la parte trasera de la videocámara
y el otro en el panel LCD.Seleccione el botón
Iniciar/Parar
grabación que mejor utilice.
1. Encienda la Videocámara con DVD.
• Conecte la videocámara con DVD a una
fuente de alimentación.
(Es decir, a una batería o a un adaptador de CA.)
• Deslice el interruptor POWER hacia abajo
para encender la videocámara con DVD.
• Coloque el interruptor del Modo de
almacenamiento en DISC.
(sólo SC-DX103/DX105)
página 30
2. Encuadre el sujeto en la pantalla LCD.
(Objetivo y LCD)
• Coloque el interruptor de
Abrir/cerrar
objetivo en abierto (
).
página 10
3. Presione el botón Iniciar/Parar grabación
.
• Aparecerá el indicador de grabación (
) y
se iniciará la grabación.
• Presione de nuevo el botón Iniciar/Parar
grabación para detener la grabación.
4. Una vez fi nalizada la grabación, apague la videocámara
con DVD.
0:00:00 [30 min]
STBY 0:00:00 [30 min]
(AD68-02550C)SC-DX100_ENG+SPA.indb 33 2008-03-05 ¿ÀÈÄ 1:30:19