3. Press the [ ][ ] keys to select page and binding orientations, and then press the [OK]
key.
The screen will show the selected copy mode.
• You can press the [Escape] key to exit to the previous level of the menu tree.
• You can change the machine's default [Duplex/Combine] setting to always make photocopies in
combine/2-sided mode.
• Setting combined/2-sided copying automatically disables the [ID Card Copy] setting.
• Temporary job settings are cleared in the following cases:
• When no input is received for the period of time specified in [System Auto Reset Timer] while
the initial screen is displayed.
• When the [Clear/Stop] key is pressed while the initial screen is displayed.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed.
• For details about [Shortcut to Function], see p.298 "Administrator Settings".
• For details about [Duplex/Combine], see p.257 "Copy Settings".
• For details about [System Auto Reset Timer], see p.298 "Administrator Settings".
• To make 2-sided copies with the Type 1 model, perform manual duplex copying. See p.169
"Making 2-sided Copies Manually (Type 1 model)".
4. Using the Copier Function
166
