Changing the Machine's Settings
182
6
Key Operator Tools Use these tools to manage use of the machine.
Note
❒ Enter a previously registered key operator code with the number
keys.
Reference
For details about the key operator code, ⇒ P.175 “System settings”.
Accessible Modes Set-
ting
You can assign user codes to each color mode. Operators must input
their user codes before using each color mode (Full color, Black &
White, Single, Twin Color).
The machine keeps count of the number of copies made under each
user code.
A Select your desired color mode.
User Codes Setting
❖
❖❖
❖ Program
You can register the user codes.
A Press the [Program] key.
B Enter the user code with the number keys. Then press the [#] key.
C
Select the color mode from [Full Color], [Black & White], [Single], or
[Twin Color] key.
Note
❒ You can up to 50 user codes.
❖
❖❖
❖ Change
You can change the user codes.
A Press the [Change] key.
B Select the user code.
C Enter the user code with the number keys. Then press the [#] key.
D Select the color mode from [Full Color], [Black & White], [Single], or
[Twin Color] key.
❖
❖❖
❖ Clear
You can clear the user codes.
A Press the [Clear] key.
B Select the user code that you want to clear.
C If you want to clear the all user codes of the page, press the [Se-
lect All] key.
Note
❒ If you want to change the [Select All], press the [Clr All Select] key.
D Press the [OK] key.
E Press the [Yes] key.
❖
❖❖
❖ Delete All
You can delete the all registered user codes.
A Press the [Delete All] key.
B Press the [Yes] key.
Menu Description
