17
English
Functional Overview
Controls on the system
1 STANDBY ON
– to switch the system on, to Standby mode.
2 DISPLAY SCREEN
– to view the current status of the system.
3 SOURCE
– to select the following:
DISC (DISC 1•2•3)
– to select disc tray 1, 2 or 3
TUNER (BAND)
– to select waveband: FM or AM.
TAPE (TAPE 1-2)
– to select tape deck 1 or 2.
AUX
–to select a connected external source: TV/VCR ,
AUX (auxiliary).
4 MIC VOL.
– to adjust the mixing level for karaoke or
microphone recording.
5 MIC IN
– to connect microphone jack.
6 SOUND
– to select various sound effect.
7 DISPLAY/OSD
– to display disc information during disc playback.
8 PROGRAM
– in disc mode, to program favorite tracks.
– in tuner mode, to program favorite stations.
9 CLOCK/TIMER
– to view and set clock/ timer.
0 TAPE DECK 1/ 2
! SURROUND
- to select various surround sound effect.
@ 5OPEN
– to open the tape deck door.
# MAX SOUND
–To activate/deactivate MAX sound and select
DBB level(DBB 1, DBB 2, DBB3) .
$ STOP 7
for DISC .................... to stop playback or to clear a
programme.
for TAPE..................... to stop playback.
for DEMO ................(in Standby mode) to activate/
deactivate demonstration.
for PLUG&PLAY ...(on the system only) to exit
plug&play mode.
% 38 (PLAY/PAUSE)
for DISC ....................to start or interrupt playback.
for TAPE..................... to start playback or interrupt
playback.
for PLUG&PLAY...(on the system only) to initiate
plug & play mode.
^ PREV / PRESET / NEXT O P
(TITLE – / +)
for DISC ....................to select previous/next title,
chapter or track during
playback.
for TUNER ............... to select a preset radio
station.
for CLOCK/TIMER .. to set the hour.
& SEARCH•TUNING 1 / ¡
(ALBUM – / +)
for DISC ....................to search backward/forward.
to select previous/next
album in MP3/WMA stop
mode.
for TAPE..................... to rewind or fast forward.
for TUNER ............... to tune to a lower or higher
radio frequency.
for CLOCK/ TIMER .. to set the minute.
* ;
– to connect headphones.
( MASTER VOLUME
– to increase or decrease the volume.
) IR SENSOR
– point the remote control towards this sensor.
¡ DISC TRAYS
™ OPEN•CLOSE
– to open or close the disc tray.
£ DISC1/ DISC2/ DISC3
– to select a disc tray for playback.
≤ DISC CHANGE
– to change disc(s).
∞ RECORD
– to start recording on tape deck 2.
§ AUTO REPLAY
– In tape mode, to select continuous playback in
either REPLAY or PLAY mode only.
p001-025-FWD798_37_EngA 2006.5.22, 3:36 PM17
