27
Quick Start
Erasing the image displayed on the LCD monitor
While the image is displayed, you
can erase it by pressing the but-
ton (The Delete screen will be dis-
played.), press the four-way controller
(̆) to select [Delete], and then
pressing the OK button.
Press the Playback button or press
the shutter release button halfway to
return to shooting status.
• When you turn the camera on while pressing the Playback
button, the camera turns on in Playback Only mode.As
the lens does not extend in Playback Only mode, this fea-
ture is useful when you want to pass the camera to some-
one and show them the picture you have just taken.To
switch to the Capture mode, turn the camera off and then
turn it on again.
• You can enlarge the image displayed on the LCD monitor
by pressing the Zoom/ / button.
• When the screen is changed to the playback screen, the
image with the largest file number will be displayed first.
• In the case of movie pictures, the first frame will be dis-
played.
• If there are no images stored, the [No image] message
will be displayed.
Zoom Display
☞
p.89
Adding a Voice Memo
☞
p.90
memo
100-0020100-0020
Cancel
Delete
MENU
OK
OkExit OkExit
File No.
e03_kb338_024_037_41e.qk 3/17/03 3:37 PM Page 27
