A SERVICE OF

logo

22 C1609M (6/04)
RECONNECT DATA AND POWER CABLES
IMPORTANT: Data and power connectors fit together only one way. All connectors are keyed to ensure that
they are inserted in the proper orientation. Examine the drive, motherboard and cable connectors before
installation so that connectors are properly aligned. Make sure connectors are seated in the mating connectors
securely, but do not force the connection. When installing drive power cables, push the connectors straight in or
out; do not rock connectors back and forth.
1. Connect the CD-RW drive to the system DX8000-EXD IDE extender card using the data cable that came with your
DX8000:
a. Connect the
black
connector of the data cable that came with your DX8000 to the CD-RW drive as illustrated
in Figure 20.
b. Connect the
blue
connector of the data cable to IDE connector labeled IDE1 on the DX8000-EXD extender card.
This is the IDE connector that is closest to the front of the DVR. Refer to Figure 20.