A SERVICE OF

logo

C1609M (6/04) 19
2c
2a
2. Remove the slot cover from PCI slot 6:
a. Using a Phillips-head screwdriver, remove the screw that fastens the slot cover to the chassis.
b. Retain this screw for use in step 5.
c. Remove the slot cover from PCI slot 6.
Figure 17. PCI Slot 6 Slot Cover
3. Carefully remove the DX8000-EXD adapter card from its static-safe packaging. Handle the adapter card by its edges
and slot cover, and avoid touching the card’s components, connectors, and conductive leads.
4. Discard any driver diskettes, instructions, and hold-down brackets that came with your upgrade kit.
NOTE: All driver software required to install and operate the DX8000-EXD adapter have been preinstalled
on your DVR.