A SERVICE OF

logo

12 C1609M (6/04)
REMOVE THE DRIVE MOUNT BASKETS
1. Remove hard drive mounting basket(s):
a. Using a Phillips-head screwdriver, unfasten the four screws that attach each drive basket to the chassis. Refer
to Figure 10.
b. Gently lift the basket up and out with drive(s) attached. Be careful not to force the basket free or to disturb
other components inside the unit.
Figure 10. Removing Hard Drive Basket
IMPORTANT: When upgrading your unit, it is recommended that you do not remove previously installed drives
from the drive baskets. However, if you do remove a drive for any reason, be sure to note the arrangement of the
drives within the drive basket and reinstall them in the same order they were before removal. It is critical that
drives be returned to the DX8000 in their original order.