A SERVICE OF

logo

Chapter 2. System Overview
4
Rear Panel
Power Socket: Connects to the power adapter provided.
RESET Button
o Press the button to restart the system.
o Press and hold the button for 5 seconds to reset the system to factory default and restart the system.
LAN 1 / LAN2:
o The LAN ports are used for connecting with wired networks. These two ports also support Power over
Ethernet (PoE).
Console:
o The serial cable attaches here. Administrators can obtain IP address information of Ethernet ports
from the console port.
Antenna Connector: The antenna attaches here. NP725 supports 1 RF interface and 2 SMA connectors for
antenna connection.